INfinity 610
Operating Characteristics
| Management Features: | Rich array of diagnostic and statistical reporting tools user-configurable alarms, and a host of management features based on industry standard protocols. Allows seamless integration into existing IT infrastructures. |
| Regional Compatibility: | Regions compatible with FCC regulations |
| Air Interface: | High performance radio and modem subsystems employing sophisticated DSP technology and advanced singulation algorithms that optimize read rates in a wide range of end-user applications. |
| Adaptive Noise Features: |
Intelligent algorithms within the INfinity 610 automatically enable the modem to adapt to the instantaneous noise and interference level, thus optimizing air interface performance and robustness for a wide range of deployment scenarios. |
| Upgradeability: | Upgradeable firmware permits forward compatibility for future protocols. |
Applications
- The IN610 is available in 4- and 8-port versions.
- Eight port models can support up to eight antennas in mono-static mode or four bi-static (4x2), while the four port device supports four mono-static or two bi-static antennas.
- The INfinity 610 easily integrates into most supply chain and closed loop UHF installations including dock door portals and conveyor systems as well as point-of-sale, access control and many other applications.
Specification
| Frequency: | UHF 902 to 928 MHz |
| Supported Transponders: | Full support of mandatory and optional features of EPCGlobal Class 1 Generation 2 and ISO18000-6C, including optional user memory and NXP EAS custom commands and Alien’s BlockReadLock command. Also supports ISO 18000-6B, and Ucode 1.19 with future protocols supported through firmware |
| Operating Modes: |
Single Interrogator Multiple Interrogator Dense |
| Communications: |
10 /100 Ethernet Port USB1.1 Type B port Serial Port EIA/TIA-232-F 115 kBaud with hardware handshaking (RTS/CTS), DCE Logical interfaces for Sirit’s CLI (providing compatibility with IN510 installations) and EPCGlobal’s LLRP v1.0.1 |
| GPIO: |
Digital Input /Output Port4 – optically coupled inputs, 25V max. Controllable input reference 4 – open-collector outputs, 3-40V, 100mA max, 1W max |
| RF Power: | +30 dBm, conducted (FCC) |
| Input Power: | 24VDC. 10W idle, 18W typical (20W maximum) at 30dBm. |
| Antenna Connection: | RP-TNC connectors. (reverse polarity) |
| LED Indicators: | Power, Activity, Environment/User, Status |
| Upgradeable Firmware: | Yes |
| Operating Temperature: | 20°C to 55°C (-7°F to 131°F) |
| Relative Humidity: | 5 to 95% , non-condensing |
| Dimensions (LxWxD): | 9.72 x 7.25 x 2.2 in (246.7 x 184.15 x 55.6 mm) |
| Weight: | 4.5 lbs (2.1 kgs) |
| Regulatory: | Compliant to RoHS, FCC Part 15, IC RSS 210, and IEC 60950 |
| Case Material: | Aluminum |
